D-GB66Q FUEL DISPENSER

D-GB66Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight: 405kg

Dimension(L×W×H) : 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 28 20ft: 13

tion pin 15-O-ring Diagram 2-27: Structure of general nozzle 1-Spout 2-Nut 3-Hex nut 4-Gasket 5-Valve washer 6-Gasket 7-Washer 8-O-ring 9-Assistant valve 10-Spring 11-Guiding bar 12-Cap 13-Seal 14-Spring 15-Bolt 16-O-ring 17-Lockwasher 18-Spring seat 19-Gasket 20-Valve body 21-Nozzle body 22-O-ring 23-Gland nut 24-Ejection pin 25-Supporting gasket 26-Pin axis 27-Suppor plate 28-Switch handle 29-Pin axis 30-Copper sleeve 31-Valve seat Diagram 2-28: Expl fuel dispenser oded drawing of general nozzle 1.2 Structure and function of key components Main valve unit Illustrated in Diagram 2-29, main valve consists of valve body, gasket, locking washer, spring seat, which is used to switch on or off the delivery pipe pf nozzle. 1-Valve body 2-Gasket 3-Lockwahser 4-Screw 5-Spring seat 6-O-ring Diagram 2-29: Main valve unit Adjusting used for change the clearance between switcher and top level, which should be kept in 0.3~ 0.5mm. Locking washer is to prevent bolt loose. Vice valve Vice valve will be closed as main valve switch off, showed in Diagram 2-30. As for fuel dispenser with presetting function, main valve don’t close after presetting filling, vice valve is closed to ensure accuracy and field clean. 1-Spring 2-Valve body 3-Guiding bar 4-Gasket 5-Valve washer Diagram 2-30: Vice valve Top level and switch handle. Used for open or clos fuel dispenser e of main valve, changing openness so as to adjusting outlet flow rate. Locking nut To pressure O-ring in case of leakage Working principal As fuel dispenser start work, lift switch handle and open main valve, oil filled with chamber of main and side valve, oil discharge fuel dispenser out of nozzle spout through pressured oil opening side valve. Usage and maintenance Nozzle is made of aluminum, which is carefully taken up and down, in case of being damaged. Regularly add greasy oil to nozzle to facilitate operation; regularly inspect O-ring, replacing damaged one. There is a regulative device between top level and switch handle, which is used to adjust clearance. Disconnect p

　 The flexibility of the FTT network allows a wide variety of network topologies. The　　 physical topology installed has a direct effect on individual application node (or　　 nodes) resilience to cable breaks.　　 In the forecourt environment fuel dispenser application nodes require a large amount　　 of resilience. Depending on whether the cabling is being installed on a green field or　　 existing site (where existi fuel dispenser ng cabling ducting has to be used) the use of local loop　　 junction boxes is recommended.　　3.4 Primary Junction Box　　 Echelon Corporation specify that in a FTT-10 LONWORKS�network there must be one　　 and only one terminator resistor. It is recommended that this 52.3 �resistor is placed　　 in a junction box called the Primary Junction Box. On any site network there must be　　 one and only one Primary Junction Box.　　Version 2.13 Page 3 of 24 December 2004　　IFSF ENGINEERING BULLETIN NO. 1 CABLES CABLING and CABLE CONNECTORS　　 The examples given in Appendix C clearly show the single Primary Junction Box in　　 each cabling topology containing the single terminator resistor.　　3.5 Secondary Junction Boxes　　 Please refer to reference Ref. 3 for informat fuel dispenser ion on Pass-Thru Stub and Local Loop　　 Junction Boxes. Local loop junction boxes should be used when high resilience is　　 required.　　4. CABLES　　4.1 Cable Specifications　　 Echelon Corporation have defined the electrical cable specifications of a LONW fuel dispenser ORKS　　 FTT network. These specifications are listed in Tables A.1.2 and A.1.3 of Appendix　　 A.　　 Cable used in a service station forecourt should not only meet all the Echelon　　 electrical specifications for a LONWORKS network but must also meet the national or　　 local requirements of statutory fire and safety

there are just five toilets between 7,000 of them, and only four water standpipes provided by the local council. There is no electricity, so the main hazard in Foreman Road is fire, caused by accidents with paraffin lamps. Residents suffer a lot of health problems, mainly stomach and respiratory ailments. Last year the accumulated grievances of the shack-dwellers erupted into protests throughout the country, with clashes between residents and police. fuel dispenser In Foreman Road, people feel betrayed by the ANC and ignored by the local leaders. They say they were promised proper low-cost housing five years ago, but nothing has happened, so last year they organised themselves into a Shack-Dwellers Movement. Their leader, S bu Zikode, says that they have been waiting patiently, “but our leaders have betrayed us. Our children will die from fires and disease. We are living like wild animals.� The ANC has accused the shack-dwellers of being politically motivated. Yet they have endured their dreadful living conditions precisely because they are all working hard to move from the “second economy�to the “first economy� as Mr Mbeki wants. The shacks may be putrid and dangerous, but they are also much in demand. When one becomes vacant, a family will scrape together up to 500 rand to buy it and get the chance of a job and perhaps even a de fuel dispenser cent education. Eighteen-year-old Philani, for instance, has lived in Foreman Road for seven years and has gained his matric exam. He is applying for jobs in sales and marketing. Philani and his peers are just the sort of entrepreneurial people the ANC needs to encourage. fuel dispenser Instead, they feel that they are being turned away. © 2006 . All together now Apr 6th 2006 From The Economist print edition Panos Public-private partnerships have worked wonders in fighting crime Get article background EVERY day, high up in the Carlton