D-GC88Q FUEL DISPENSER

D-GC88Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 450kg

Dimension(L×W×H) : 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 26

re approval working successfully being conducted. Environmental temperature as approval should keep in the range of �0�to �0� in approval process temperature not exceed 3� relative temperature between 30�and 90� power supply within �0% to �5%; and frequency ±1Hz. The mediums used in ap fuel dispenser proval should adapt real media excepti fuel dispenser ng in factory approval. As different medium would be adaptable to fuel dispenser, every medium should be appraised. Some of them are prohibited, especially water. The highest temperature of medium in approval should not exceed 30� the lowest temperature without coagulation. The temperature difference between the one at the outlet of fuel dispenser and the temperature measured in standard instrument should not exceed 4� Otherwise, the approval is invalid. Standard instrument used in approval whose measuring accuracy no lower than one fifth of the allowed tolerance of fuel dispenser, should pass over appraisal of the Measurement Department and be valid within period. There are many standard instruments being adaptable to fuel dispenser’s approval, however, the most popular one is standard metal instrument of measurement. Standard metal instrument of measurement adapted in approval should, in accordance with the requirement of fuel dispenser’s regulations and procedure, be Class II standard metal instrument of measurement with cubage no less than one minute’s discharge volume of fuel dispenser, approval period being 3 years. Standard metal instrument of measurement often is made of stainless steel or carbonized steel with protecting painting, no air vent, erosion-resistant and smooth surface. Its structure is shown in Diagram 8-1. 1: Overflow cover 2: Metering neck 3: Body 4: Bracket 5: Adjusting bolt 6: Drain valve 7: Leveling instrument 8: Scale Diagram 6-1: Sketch map of metal standard instrument of measurement Standard instrument of measurement is composed of overflow cove fuel dispenser r, body, measuring neck, scale, valve, which should meet the follo

No encryption required.　　 1 2 3　　 The PIN pad will be tamper　　 4 5 6　　 7 8 9 responsive　　 0　　　　 3　　 X　　 Half initial cost and much　　 lower cost fuel dispenser of ownership　　 ..and who di fuel dispenser ps the chip?　　 Any EMV level 1 reader...　　 Separate PIN without mag. stripe　　pad and reader　　 1 2 3　　 4 5 6　　 7 8 9　　 emvelink ?　　 0　　　　 3　　 X　　 with mag. stripe　　Combined PIN　　pad and reader　　 separate　　 1 2 3　　 4 5 6 mag. stripe　　 7 8 9　　 0　　 slot or hybrid　　 3　　 X　　 Some Examples - Sagem　　 System Architecture (SW Platform)　　 Acquirer　　 PC in Target　　 Equipment　　Software　　 Business　　 Application　　 PSTN　　 ISDN　　 EMV　　 Payment　　 WAN　　 Application　　 USB or RS232 USB or RS232　　 Integration API　　Some Examples - Dione　　Some Examples - Intellect　　 Some standards　　 Card　　 Point of Payment　　 EMV Level 2　　 1. fuel dispenser

d least successful organisational forms.� Messrs Ghoshal and Bartlett wrote in the past tense, suggesting that companies had escaped from the matrix corset. But 15 years after the article was published, many are still trying to struggle free. Gerard Fairtlough, a former CEO of Shell Chemic fuel dispenser als and the founder of Celltech, a Bri fuel dispenser tish biotechnology company, also suggests that companies are still being held back by their addiction to hierarchy. In a recent book, “The Three Ways of Getting Things Done� he points to alternatives to the hierarchical structure that many companies see as their only option. “You can t have a bunch of hippies running a plant full of explosive hydrocarbons,�he says. “But would you rather have the plant operated by trained professionals, for whom pride in safe working is part of their personal identity, or by people who only work safely because they are afraid of the boss? The identification of discipline with hierarchy is a dangerous mistake.�Mr Fairtlough s preferred alternative is something he calls “responsible autonomy� a form of organisation in which groups of workers decide for themselves what to do, but are accountable for the outcome. Clearly there is a need for new kinds of organisation that are more appropriate to modern working methods. But there are many reasons why companies are not in a hurry to adopt them. © 2006 . The matrix master Jan 19th 2006 From The Economist print edition Philips redraws the lines PHILIPS, a Dutch electrical giant, was one of the earliest champions of the matrix structure. After the second world war it set up both national organisations and product divisions. The boss of the washing-machine division in Italy, say, would report to the head of Philips in Italy as well as to the washing-machine supremo in the Netherlands. This network was loosely held together by a number of co-ordinating committees des fuel dispenser igned to resolve conflicts between the two lines of command. By the 1990