P-G FUEL DISPENSER

P-G FUEL DISPENSER

Pump Type :Optional

Inlet Pressure:>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

used to keep a certain position to refuel. Working principal Pressured oil flow into the chambers in where main and vice valve located after switching main valve and flow out of spout because vice valve is opened. Liquid flowage reduces the static pressure and the pressure in upper chamber of switch. The pressure on the chambers of upper and low switch membrane are equivalent due to the front of spout communicating atmosphere. When inlet vent is flooded by oil, the lower chamber of switch membrane still keeps atmospheric pressure. Thus, pressure difference is generated between the upper and lower chambers of switch membrane, the membrane and auto-shut level movi fuel dispenser ng upward, auto controlled level moves downward under the function of switch handle. Finally, steel ball is driven into the hole of auto controlled level; switch handle continues to move downward; main valve is closed. In order to form the auto-shut function, two oil passages with different sections should be set (See Diagram 2-32). Here the Bernoulli equation as followed in order to explain the principle of auto-shut: �? = 12 ρv12+ρgh1=�?+12ρv22+ρgh2 (2--6) Among the above formula: ρ── oil density �?── pressure in main valve passage v1 ── velocity of flow in main valve passage h1── height of main valve �?── pressure in vice valve v2── velocity of flow in vice valve passage h2── height of vice valve Diagram 2-32: Auto-shut nozzle Due to small nozzle body, it could be regarded as a horizontal pipe, that is h1= h2 From Formula 2-6: �?－ｐ2�?2ρ(v22－v12) (2-7) According the following Formula: v1v2=A2 A1 In th fuel dispenser e Formula: A1 ── section of main valve passage A2 ── section of vice valve passage The Formula can be converted into: �?－ｐ2�?2ρv22 [1�?A2A1)] It is known from Formula 2-8 that if A2 / A1 is certain value, P2 becomes a negative value when velocity of flow increasing a certain extent, that is, P2 smaller than at fuel dispenser

s:complexType　　 xs:sequence　　 xs:element name=SecureData　　type=SecureDataFlow minOccurs=0 maxOccurs=unbounded　　 xs:element name=InputValue　　type=InputValueType minOccurs=0　　 xs:sequence　　 xs:attribute name=InDeviceTarget type=DeviceType　　use=required　　 xs:attribute name=InResult type=RequestResultType　　use=required　　 fuel dispenser xs:complexType　　 xs:element　　 xs:sequence　　 xs:attribute name=RequestType type=DeviceRequestType use=required　　 xs:attribute name=ApplicationSender type=ApplicationType　　use=required　　 xs:attribute name=WorkstationID type=WorkstationIDType use=optional　　 xs:attribute name=TerminalID type=TerminalIDType use=optional　　 xs:attribute name=POPID type=POPIDType use=optional　　 xs:attribute name=RequestID type=RequestIDType use=required　　 xs:attribute name=SequenceID type=SequenceIDType use=optional　　 xs:attribute name=ReferenceRequestID type=RequestIDType use=optional　　 xs:attribute name=OverallResult type=RequestResultType use=required　　 xs:complexType　　 xs:eleme fuel dispenser nt　　 xs:schema　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　Page 102 of 146　　16. APPENDIX J XML TYPES DEFINED WITHIN IFSF　　IFSFBasicTypesCards.xsd　　 ?xml version= fuel dispenser

e can be compared with a ready-made control group the otherwise identical families that did not. This makes it possible for the study to distinguish cause and effect; to isolate the impact of title from all the other confounding factors. The results of the experiment are mixed. Secure land rights do encourage the poor to build their nests. But even in a relatively advanced country such as Argentina, title is not enough in itself to animate the dead capital interred in land and property. The landowning families invested more in their homes, which had noticeably better walls and roofs. They were also more likely to lay concrete pavements. But the titled hou fuel dispenser seholds enjoyed no better access to bank loans, credit cards or bank accounts, and only 4% of them managed to acquire a mortgage. Disappointing, but not surprising, Messrs Galiani and Schargrodsky argue. Argentine banks tend to lend only to workers with high wages and a stable job. Titled or not, the former squatters still fell well below the official poverty line. The cost of making and enforcing a loan contract might exceed the modest sums they were able to borrow. Others say the experiment might be too recent to deliver a conclusive verdict. The government did not allow the newly entitled families to transfer their land for a decade, thus by the time they answered the economists survey in 2003, they had enjoyed full rights to their property for seven years, not 17. The credit market has also been slow to respond to a much bigger urban-titling movement in Peru, carried out by the government with the help of Mr de Soto s think-tank, the Institute for Liberty and Demo fuel dispenser cracy (ILD). The campaign had awarded over 1.5m titles by July 2006. But it did not do them all at once. Erica Field of Harvard University and Maximo Torero, of the International Food Policy Research Institute, have compared 536 households served before March 2000 with another 1,180 households that had yet to be reached by that date, on the assumption that little else fuel dispenser