P-G22 FUEL DISPENSER

P-G22 FUEL DISPENSER

Pump Type :Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 235kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

ws into pipe because of adapting one pipe in two fuel dispensers or other leakage. Bottom valve in tank or single valve in pipeline is stuck and damaged, no oil into pump. Oil level is lower than bottom valve or suction nadir. Counter at beginning of operation Due to long and much soft, hose tends to bulge under a certain pressure. Transducer will count as bulging pressure out of certain scope. This trouble can’t be solved through shorten or replace hose. As leakage in bottom valve or pipe, oil flow back into tank between operation interval because of lower oil level in vapo fuel dispenser r separator and pump. Air in transducer drives to count as next time refueling. The longer interval time the more data jump. Inspect and solve pipeline leakage of oil and air. Unstable flow rate makes large tolerance; air leakage in bottom valve and pi fuel dispenser pe oil level low than bottom valve bring about much air flow into fuel dispenser. Article III Important notices to dispenser’s maintenance Due to fuel dispenser located in flammable and combustible location, operator should pay much attentions to security preventing accident occur on human and equipment, and strictly abide by the following general requirements: Smoking and open flame is strictly prohibited in filling station in case lead to fire. Maintainer should, in accordance with safety regulations in filing station, not wear shoes with metal nail and chemical fiber easy to generate static. Cut power supply prior to m fuel dispenser aintain fuel dispenser; pick down V belt then empty oil filled in part where need to be done. Pour oil into container in case of splash out. Repairing tools should be explosion-proof, prohibiting randomly throw in case of generating spark and accident. Pay much attention not to the joint surfaces of seal and metal parts, which would lead to leakage. All components and sections should be cleaned so to prevent giblets or waste destroying parts. Carefully inspect wire connection after maintaining electric equipment, abstaining new trouble.

1 % F.S.　　 4.8　　 Q (Ls)　　 0 4　　 theoretical　　 curve　 fuel dispenser 　 4.7　　 (c) ATs 3　　30　　 fuel dispenser 3　　20 4.6　　 B (pT)　　 2 1.86 1.87 1.88　　 ts　　10　　 1　　 0　　 0　　 fuel dispenser 2 5　　 4　　 3　　 8　　 6 10 12 16　　 14　　

s are “non-negotiable”—is seen by many MPs as a continuing provocation to the party and its supporters. For a few, the deep embarrassment of a party-finance scandal has provided a further reason for Mr Blair s removal. In his long-running battle to reduce the influence of the unions, Labour s traditional paymasters, Mr Blair hoped that the subscriptions of ordinary party members and the donations of the rich, gratified by the government s pro-business stance, would reduce the party s dependence on organised workers. But as party membership fell (in part because of Iraq), the reliance fuel dispenser on rich individuals increased. For most of the past year the police have been investigating the possibility that peerages have been offered in exchange for loans. The awful, though remote, possibility hangs over the prime minister of leaving Downing St fuel dispenser reet in the back of a police car. If those were the immediate causes of the attempt by a section of his party to bring down the prime minister, it still does not provide quite the whole explanation. Mr Blair had given private assurances to close colleagues, including the chancellor, Gordon Brown, that he would be off by next summer. Why then risk the certain collateral damage that a putsch would cause to bundle Mr Blair out of office a few months early? And was Mr Brown, if not pulling the strings of the rebellion, acquiescent in it? Last weekend Mr Brown claimed that he had given the plotters no encouragement. Had he known fuel dispenser of the letter and planned resignations from the government, he would have said it was “completely ill-advised�? he avers. Unfortunately for the chancellor, few, especially those close to Mr Blair, are inclined to believe his protestations of innocence. The revelation that Tom Watson, the most notable of the signatories and an acolyte of Mr Brown s, visited the chancellor at home in Fife the day before the letter was faxed to Downing Street is deeply embarrassing for the chancellor. Apparently, Mr Watson made the 1,000km (600-mil