U310 Manual Nozzle

U310 Manual Nozzle

For Heavy Duty, High-flow Truck stop, Bus and Fleet Service If you operate a full-service truck-stop, refuel your own fleet, or manage a card-lock refueling location, the low cost, long life and durability of the 120L high flow nozzle can help increase your productivity, sales and profits.

Warning

Do not use U303 Nozzles with a hold-open device on prepay self- service installations.Using foreign objects to hold-open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U303A/B Flow rate: 0-120L/m (113/16")

U303C/D Flow rate: 0-90 L/m (1")

Working Pressure: 0.18Mpa

U303 Automatic Nozzles for diesel, kerosene and all kinds of gasoline service.

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Even, smooth, spray pattern- minimizes diesel foaming and false shut-offs.

Three position hold-open device- one finger control of hold-open mechanism means easy setting of flow rate.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.Available Colors- color chart on inside back cover

Dual poppet valves- easy to open nozzle against high pressure.

Spout retaining ring- adds extra measure in securing nozzle spout in fill pipe.

100% Factory Tested.

Replacement Parts:

Key Description

1 Spout 1''

2 Spout 13/16''

3 Full hand insulator

4 Lever

5 Lever assembly

6 Diaphragm assembly

7 Main valve assembly

Package:

Net Weight Cross Weight Dimension

16kg/case of 10 19kg/case of 10 45x40x32.5cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

erally is mounted centrifugal pump installed in tank. The inlet pressure of fuel dispenser with submersible pump is higher than atmospheric pressure. Submersible pump consists of pump, connecting pipeline and controller. The appearance of submersible pump and its position in tank is showed in diagram 2-10. Diagram 2-10: Submersible pump position and figure Submersible pump is composed of motor and centrifugal pump. Pump motor includes electromotor, wiring panel, overheat protector and pipeline; centrifugal pump has the elements of filter, anti-static subassembly, impeller and pump axis. Diagram 2-11: Main structure of submersible pump Conne fuel dispenser cting pipeline has two types of fixed and stretched. The former type consists of oil pipe, vapor-recovery pipe, lead pipe and wire. The later type is formed by oil pipe, vapor-recovery pipe, adjusting nut, lead pipe and motor wire. Controller is divided as two parts, upper and lower. Upper part have these components junction box, electric bridge, capacitor, exhausting plug, check valve, pressure adjustor, testing interface of exhaustion and pressure, leakage monitor of pipe. However, lower part is constituted by pipe jointer, lead terminals, pump holder, etc. By function, submersible pump is classified as four categories, namely, standard type, enhanced type, changing-frequency type and large flow type. The standard type access to general requirements, but the enhanced type not only increase flux than standard type, but also available to mix liquid of gasoline with alcohol. The changing- frequency submersible pump adopt pipe pressure to judge flux. Given a situation in inefficient flux and low pressure the electric frequency of motor would tune high through computer, so as to elevate rotate speed and increase flux. Contrarily, to reduce electric frequency and rotate speed as pipe fuel dispenser pressure being low, adjusting appropriate flowage. The large flow type is adapted in filing station in where needs quickly operation. Some submersible pump has the flow speed of mo fuel dispenser re

Page: 83　　 METER DATABASE　　 DB_Ad = M_ID (81H-90H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 4 Bin8 R(1-9) M　　 PR_Id　　 (04H) (1-8) W(1-2)　　 fuel dispenser Identifier of the product measured by this meter. The　　 PR_Id (value 1-8) specifies the product which is stored in　　 the Product Database PR_ID (address 41H-48H).　　 0 = no product assigned　　 1 = product in Product Database with address 41H　　 2 = product in Product Database with address 42H　　 媴　　 媴　　 8 = product in Product Database with address 48H　　 Please note that dispensers that do not permit this Data_Id　　 to be changed remotely should:　　 Reject any write attempts with a Data_ACK value　　 of 2 (Read OnlyNot Writable).　　 Must set the Data_Id to the hardcoded default　　 value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its default　　 value.　　 PCD Comment:　　 It s important that the PCD supports this configuration　　 Data_Id as it will be critical in calculating totals where the　　 proprietary pump pro fuel dispenser tocol can not supply the totals　　 directly.　　 TOTAL　　 20 fuel dispenser

om a lowish base); Britain s future stockpile of fewer than 160 warheads will be the smallest. But a lot more could yet be done to show NPT-willing. As low as you can go America and Russia, with by far the biggest arsenals (between 1,700 and 2,200 deployed strategic warheads apiece by 2010), could go a lot lower, and should talk more about how to do it. France, unlike Britain, has yet to agree that, as numbers fall, its weapons will eventually be on the negotiating table too. China unhelpfully keeps its nuclear plans to itself. Meanwhile, America and China still have not ratified the treaty to ban all weapons tests. And serious work is n fuel dispenser eeded to cap production worldwide of bomb-usable fissile materials. Unilateral disarmament by Britain would not shock India or Israel or Iran into dropping their nuclear ambitions. Those are driven instead by rivalries closer to home. Meanwhile, the weapons Britain does keep, as before, will need periodic modernisation to improve safety and reliability. Far from undermining the NPT, confidence that weapons will work as intended is the way to keep numbers low. © 2006 .  About sponsorship On energy security, China s market for cars, the veil, roundabouts Dec 7th 2006 From The Economist print edition The Economist, 25 St James s Street, London SW1A 1HG FAX 020 7839 2968 E-MAIL letters@economist.com A secure energy future SIR �Your report on investing in clean energy highlights the fact that public and political support for renewable energy may wane when the cost is perceived to be too high (“Tilting at windmills� November 18th). However, the case for government subsidies and mandates to compensate for failure in energy markets is strong. For instance, the price Americans fuel dispenser pay for oil does not cover the risks to the economy from delivery disruptions, price spikes, the vast expenditures required to protect supply routes and infrastructure, or t fuel dispenser