U312 Automatic Nozzle

U312 Automatic Nozzle

U312 series automatic nozzles are designed with today's customer in mind. Small, trim, light weight, easy and convenient to operate, the is a rugged performer that offers long life and reliable service.

Warning

Use foreign objects to hold open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U312-B/D/F Flow rate: 0-60 L/m (15/16")

U312-A/C/E Flow rate: 0-45 L/m (13/16")

Working Pressure: 0.18Mpa

U312 Automatic Nozzles-or diesel, kerosene and all kinds of gasoline service

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Low profile aluminum body- light weight, easier to handle, provides an attractive, image enhancing appearance.

Hold-open rack is available for full service applications.

The one hand control means easy setting to flow rate for customer's convenience.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.

Vacuum Design: Side-Sealing Design.

Selective casting process of body- low-pressure casting technique or high-pressure casting technique.

The high-pressure casting technique can reduce diesel foaming and static electricity.

100% Factory Tested.

Available Colors- color chart on inside back cover Selective splash guard.

Replacement Parts:

Key Description

1 Spout 13/16" & Spout 15/16"

2 Full hand insulator

3 Main Valve Assembly

4 Lever

5 Ratchet Pin

6 Diaphragm assembly

Package:

Net Weight Cross Weight Dimension

18.75kg/case of 15

12.25kg/case of 10 22kg/case of 15

15kg/case of 10 55x34x42.5cm/case of 15

37.5x34x43cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

e hydraulic pulse so as to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable --- pressure pulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pump inlet is not fuel dispenser always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be brought two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more o fuel dispenser ften. The Article 6.2.6 in GB50156-2002 the fuel dispenser Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to reduce pressure and electricity loss, and to decl

xs:annotation　　 xs:documentation Libyan Arab Jamahiriya xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=LI　　 xs:annotation　　 xs:documentation Liechtenstein xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enum fuel dispenser eration value=LT　　 xs:annotation　　 xs:documentation Lithuania xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=LU　　 xs:annotation　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　 Page 127 of 146　　 xs:documentation Luxembourg xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=MO　　 xs:annotation　　 xs:documentation Macau xs:documentation　　 xs:annotation fuel dispenser 　　 xs:enumeration　 fuel dispenser 　 xs:enumeration value=MK　　 xs:annotation　　 xs:documentation Macedonia The Former Yugoslav Republic　　Of xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration va

just on government overlooks more complex factors. You also suggest that possible government interference disabled the leadership of the Wafd Party. Sadly, Wafd has been in decline for years. In last February s Country Report, your sister company, the Economist Intelligence Unit, recorded the climax of this process when the Wafd committee voted to remove their incumbent leader, Noman Gomaa, from office. It seems unrealistic to attribute such deep-seated internal party difficulties to government doing. Third, fuel dispenser you lament that emergency laws in Egypt have not been repealed in line with an election promise. Egypt is facing turbulent times and is regrettably afflicted by the scourge of international terrorism. We are conducting a similar debate to that in Britain on the best way to respond. Our new parliament, which sat barely four months ago, should be allowed more time to agree on the appropriate legislation. Ayman Alkaffas Press counsellor Embassy of Egypt London French trade unions SIR �You rightly point out that despite a low level of membership, trade unions in France retain a strong influence thanks to legal arrangements (“Power without responsibility� April 29th). This is because an important piece of legislation states that the outcome of negotiations conducted between employers and trade unions automatically apply to all firms in the same industry. Thus nearly all employees in France are covered by collective negotiations, and the trade unions are in fact defending the interests of the many, not the few. Emman fuel dispenser uel Gastard London Slippery customers fuel dispenser SIR �To suggest that it is only the state-run oil companies, such as Venezuela s, that are inefficient and politicised is naive (“Oil and hauteur� May 6th). The implication that the American-based, multinational oil companies are not themselves highly politicised is nothing short of laughable. Indeed, it is indisputable that they presently have their own operatives holding many levers of power in the world s