
U405 Reconnectable Breakaway
The U405 is a dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the U405 seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the U405 must always be installed With a straightening hose with a minimum length of 9". For low hose applications, the U405 should be installed down stream of the retractor cable.
WARNING
We advice you replace a new U405 breakaway when the pull-force is lower than 180 lbs after many reconnections
Materials:
Body: die cast zinc
Main Seals: Viton
Main Spring: stainless steel
Guide and poppet: POM
Protective Sleeve: Pa66
Features:
Pull force- the U405 will break away with a pull force of 250 lbs 5%, the U405 will break away with a pull force of 300 lbs 5%.
Unique double-poppet design-features low pressure drop.
Flow rate: 0-60L/Min
Working pressure: 0.18Mpa
Coupling halves- protected by proven plastic sleeves
Easily reconnected- just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15 lbs.
Line shock - U405 is able to absorb the effects of normal line shock through the unique design of the disconnecting features.
May be reconnected under wet or dry hose conditions.
100% Factory Tested.
Package:
Product ID Net Weight Cross Weight
U405-A 26.5kg/case of 50
30kg/case of 50
35x35x26 cm3 /case of 50
U405-B 26.5kg/case of 50 30kg/case of 50
35x35x26 cm3 /case of 50
U405-C 26.5kg/case of 50 30kg/case of 50
35x35x26 cm3 /case of 50
U405-D 26.5kg/case of 50 30kg/case of 50
35x35x26 cm3 /case of 50
we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.
ome to Seattle, looks set to go to a mail-only system in 2007, doing away with polling
stations altogether. The idea is that one system will be simpler. Ron Sims, the county executive, explains that this
will be cheaper in the long term. And he thinks voters prefer it.
Polling stations are going out of fashion in plenty of western states. There are three basic forms of postal voting.
The most common is absentee voting. If a voter will be out of town on election day, he can request a postal ballot.
All states allow this, and nationwide about 13% of all ballots counted are absentee.
But some states, including California, go a step further by allowing voters to register as permanent absentees—so
that at every election they will au fuel dispenser tomatically receive a ballot in the mail, regardless of whether they are at away or
at home. In the 2004 general election a third of the votes in California were absentee and 18% were permanent
ones. In last year s special election, 40% of ballots cast were absentee ones with the figure being over half in many
Bay Area counties.
The biggest switch is to allow mail-only voting. The pioneer was Oregon, where polling stations got axed in 2000.
Arizonans will probably get a chance to decide in November whether to switch. In Washington and Colorado, that
decision is left to counties—and most are making the change (the one twist being that in Colorado you are not yet
allowed to go mail-only in even-year partisan elections).
An hour or two in the queue
The main reason to change is convenience. Western states are famous for masses of ballot initiatives that can take
hours to decipher. “In 2000, think about what it would have been like in a polling place if you had to wait in line
while every voter had to work through 26 measures,�says Bill Bradbury, Oregon s secretary of state. Oregon also
helpfully sends everyone voter pamphlets, which give the background on both sides of an initiative.
Fans of postal voting claim that convenience increases turnout, espec fuel dispenser fuel dispenser